Best Edger Blade

Top 8 Best Edger Blade Reviews and Buying Guide in 2021

You can weed, rake and mow your lawn all you want, but if you fail at edging it, it will not look as flawless.

The reason it might not be as flawless as you want it is because you don’t own the best edger blades in your arsenal.

What makes such a blade the best, you may ask? Well, there are certain features that an edger blade should come with to be considered impressive, and even with these features, very few stand out.

The type of blade, sharpness, compatibility with most lawnmowers, and the ability to provide smooth edging are what determines whether an edger blade is high quality or not.

If you are searching for such blades that meet your needs, you have come to the right place.

In a hurry? Just Follow This Table

What Is Edger Blade and How to Change it?

Generally speaking, edger blades are the type of blades that are used to tidy up the grass of your lawn.

Just mowing isn’t enough; you need to trim the edges in order to make it look aesthetically pleasing.

That is where a good edging blade comes in. You can easily use it to cut and smoothen the grass that grows around your walkway, driveway, patio, street, etc.

If you want to separate the grass from the turf and your desired area, you need a good-quality edger blade.

So, how do you change an edger blade? Just follow this little step by step process:

  • First, you have to get an edger blade replacement
  • Take the edger blade off the weed whacker or mower and attach a screwdriver to the hole of the spindle
  • Lock it in to prevent rotation and then connect a ratchet with a half socket with the spindle nut
  • Then remove the washer and the spindle-nut
  • After removing the old blade, attach the new blade in the position
  • Replace the washer and place the nut on top of it
  • Secure it all into position, and you’re done replacing the blade

Our 8 Best Edger Blades Review

Now that you know the basics of lawn edger blades, it is time that we delve into the reviews of the eight best blades in the market. We compiled this list of products after extensive research and shortlisting, so be sure to check them all out!

1. 375-311 Star Shaped Edger Blade by Stens

Right off the bat, we have the 375-311 edger blade by Stens. We would consider this bad boy, hands down, one of the best edger blades one could purchase.

Being well known for its lawn mowing equipment and parts manufacturing, Stens maintains quality in their edger blades too!

This blade comes at a 36-inch depth and 9-inch length and width. The blade requires a manual type power source and is compatible with most, if not all, weed whackers and lawnmowers.

Pros

  • Comes with four blades that provide more precise edging
  • Large in size at 9 x 9 inches to cover more area for cutting
  • It has a durable construction and won’t fall apart while edging
  • Compatible with most weed whackers and lawnmowers

Cons

  • Very sharp and dangerous to use

Verdict

We recommend this product for its smooth edging and ease of use but advise you to use it cautiously.

2. Heat Hardened 4 Pack Edger Blade by RYOBI

The previous one may have had four blades attached together, but this one by RYOBI offers four separate blades.

Coming with genuine rotary replacement, these types of flat blades are perfect for simple edging on the lawn. Each blade comes at a length of 7-11/16” and a width of 2”. In terms of thickness, it is 0.1250” deep.

One specialty of this product is that it is one of the STIHL edger blades. Installation is super easy, and the blades are compatible with Green Machine and Echo Edger, Maruyama Edger, and Stihl FC 72 Trimmer.

Pros

  • Being flat blades, these are great for the simple edging jobs
  • The blades are sharp enough at a thickness of 0.125 inches
  • Compatible with a large number of yard machines
  • Effortless installation saves a lot of your time

Cons

  • Not suitable for heavy-duty edging

Verdict

If you want a simple set of edging tools with flat blades for your lawn, this would be a great choice.

3. 3-Sided MTD Genuine Edger Blade by Arnold

Back with another star shaped blade, we have the 3-sided MTD by Arnold. If you liked the first product we reviewed but want one with three blades, this is the one for you.

The length of the blades is 9 inches with a center hole of 5/8 inches. This blade, offering utmost sharpness, is excellent for heavy-duty edging.

It is compatible with MTD, MTD Gold, Troy-Bilt, Yard-Man, Huskee, White Outdoor, Bolen Units, and Yard Machines. This blade edger is versatile and easy to use regardless of which machine you own.

Pros

  • Features a large blade size of 9 inches with high sharpness
  • Being a rugged option, this one is great for heavy-duty edging
  • It is compatible with a wide range of machinery making it versatile
  • As a 3-sided blade, you can edge up the corners of your lawn with this

Cons

  • Slightly on the expensive side

Verdict

If your budget allows it and you want a heavy-duty edging blade, we would definitely recommend getting this one.

4. 4 Pack Edger Blade by Rotary

If you liked the 4 set blades from RYOBI, you will definitely like this one. It is essentially the same set of blades but by the brand Rotary.

While searching for the finest edger blades for STIHL, we found this one, and believe us when we say this definitely lives up to our expectations. With a similar size to the RYOBI one, this one measures 7-11/16 inches in length and 2 inches in width.

This one is also perfect for light lawn edging and offers good enough sharpness at 0.125 inches thickness. And it is compatible with a large number of yard edging machines.

Pros

  • Features sharp edges on the blades for smooth cleanup of your lawn
  • The length and size is optimum for simple edging work
  • Compatibility with a large number of machines is a bonus
  • With its sharpness and durability, it is a great option for STIHL

Cons

  • Not meant for heavy-duty edging

Verdict

If you don’t need heavy-duty performance from your edger blade, this should be a good choice for you. We certainly recommend it for its simplicity.

5. EB-007 Edger Blade by BLACK+DECKER

Next up, we have a slightly different design for an edger blade. The EB-007 by BLACK+DECKER features serrated blades for an aggressive cut on the edges of your lawn.

The size of the blade is 7-1/2 inches long and comes with an edger replacement blade as well. The material of the blade, steel, is what ensures the heavy-duty edging. It is compatible with LE710, LE750, and LE760 models.

Pros

  • It comes with serrated blades for aggressive edging
  • Perfect for heavy-duty edging due to the serrated blades
  • Compatible with a lot of different models of machines
  • Comes with replacement blade for emergency replacements

Cons

  • Not very durable

Verdict

We have mixed feelings about these garden edger blades. On the one hand, they are sharp and great for heavy-duty edging, and on the other, they may not last long enough. So if you are okay with replacing frequently, then go for this product.

6. 100 Pack Edger Blades by USA Mower Blades

If you don’t need just 1 or 2 blades but need an entire supply of 100 horizontal blades for the next few years, this is the best set of products for you.

The USA steel edging blades are high quality in general and come at 8 inches long and 2 inches wide, and 0.120 inches thick.

These blades are compatible with Echo-PE2000, PE2400, Stihl-FC72, FC75, FC85, FC110, and PE3100, PAS2601, and PE2601.

Pros

  • Long blades with decent sharpness of 0.120 inches thickness
  • It comes in a pack of 100 blades, so it’s a supply for several years
  • The blades are compatible with a large number of yard machine
  • Great for edging up the grass beside your patio, drive way and street

Cons

  • Not appropriate if you don’t want a bulk quantity of blades

Verdict

Overall the blades are pretty decent. However, we wouldn’t recommend it if you don’t want to spend all that money on such a large supply of blades. But if it’s to start a business, then we give you the green signal to purchase this!

7. 5 Pack Edger Blade by MowerPartsGroup

If you are looking for high-quality gator edger blades, this five-pack set by MowerPartsGroup is the one for you.

These blades are essentially the same as the US Mower blades but with a lower thickness. At a blade thickness of only 0.105 inches, the MowerPartsGroup edger blades are very sharp. It measures 8 inches in length and 2 inches in width, just like the previous one.

These blades are versatile enough to be compatible with Echo, Husqvarna, STIHL, RYOBI, and Redmax. You can say this is one of the best edger blades for STIHL.

Pros

  • Long edger blade with sharp edges measuring 0.105 inches thick
  • Compatible with Echo, Husqvarna, Stihl, RYOBI and Redmax
  • You can expect this edger blade to offer smooth edging
  • Being a 5-pack set, you get 4 replacement blades for later use

Cons

  • Not durable enough

Verdict

These blades aren’t anything too impressive, but they get the job done. Be careful while using them, as they are pretty sharp. Overall, it’s a maybe from us.

8. 3-Sided Edger Blade by Oregon

And last but not least, on this list of top edger blades, we have this three-sided rounded-edged blade by Oregon.

The blade’s diameter is 9 inches, while the diameter of the center hole is 5/8 inches. While this may not be anything special considering the previous ones we have reviewed, it isn’t bad either.

It is bending resistant and does not break or fracture easily either. These blades have been heat-treated to ensure maximum durability. The only issue is that the blade isn’t pre-sharpened, and you have to get it done yourself.

Pros

  • Decent size of the blade with 3-teeth design for good quality edging
  • Highly durable with resistance to bending, breaking, and fracturing
  • Compatible with almost any yard machine you can think of
  • Rounded edge blade for precision cutting of grass on your lawn

Cons

  • Requires additional sharpening

Verdict

If you want a decent quality 3-sided edger blade, this would be an okay choice. We have reviewed the better options above to decide if you want this or one from the previous ones.

How to Go for the Right Edger Blades

Choosing high-quality lawnmower blades is not rocket science and requires very little research. There are a few features you need to look out for, and they are described below.

1. Blade Sharpness

Edger blades are made using cutting-edge technology (pun intended), and the sharpness of these blades is immensely important. You can’t expect edger blades to be blunt.

While some blades may not come pre-sharpened, which they usually don’t, you need something that would be easy to sharpen. The thickness of the blades mainly determines this factor.

So what exactly do we look for in a blade to tell whether it is sharp enough or not? The thickness should be below 0.125 inches. Anything between 0.125 inches and 0.105 inches is considered thin enough and should provide enough sharpness.

For the ones that don’t come pre-sharpened, these should be easier to sharpen as well.

2. Durability

Durability is one of the most important aspects of edger blades. Most such blades don’t last too long and require replacements every now and then. So you want something that will last enough.

You can’t have a blade that would break after being used only a few times. A standard edger blade should last for at least 2-3 weeks. And if they last about a month, you are very lucky, to be honest.

What exactly impacts the durability of a blade? Well, the construction material definitely plays a massive role in how long your edging blade will last. Apart from that, other things influence it as well.

Resistance to bending, breaking, and/or fracture can help retain the structure of the blades, and as a result, last a long time.

3. Compatibility

The good thing about commercial edger blades is that they are usually compatible with most edgers, lawnmowers, and trimmers.

While they may not be suitable for every brand out there, you can expect them to be used with the most notable ones.

Some common brands of edgers and mowers are Echo, Husqvarna, Stihl, RYOBI and Redmax.

So, if your edger blade is compatible with these brands, you know it will be compatible with the machinery you own. Because chances are, you own one from these brands anyway.

The blades should be easy to mount and not be too heavy for the edger you own. Or else you might have trouble replacing everything.

4. Price

It doesn’t go without saying that you don’t want to spend a fortune on an edger blade. It is something that you will frequently be replacing and changing.

So, it doesn’t make sense to spend too much money on one.

However, don’t buy the cheap ones, as those can provide overall zero value to your edging experience. A good price range would be around 10-15 bucks.

It shouldn’t feel like a lot of money at this budget, and you can also rest assured that the quality won’t be compromised either.

3 Types of Edger Blades

There are mainly three types of edger blades that you would come across in the market, and they each serve a different purpose. Let’s take a look at these types.

  • Flat Blades

Typically available in a horizontal rectangular shape, the flat blades are perfect for simple lawn edging tasks. They usually have pointy edges and are super sharp and thin.

If you want to smoothen the edges of your lawn with your patio, driveway, or street, this is the best choice. However, there are some downsides to this type of stick edger blades.

The main issue with these blades is that they do not really offer as much maneuverability as you would expect. You have no way of rotating the blades through any type of terrain.

So, in our opinion, the best way to use this kind of blade is by attaching them to a gas/electrically powered edger.

  • Star-Shaped Blades

It is, as the name suggests, a star-shaped edger blade. Different numbers of teeth may form this star shape. Some blades may be available in 3 teeth designs, while others may have four or even five teeth.

The purpose of this shape of a blade is very specific. Let’s say there is a solid barrier beside your lawn, maybe like a wall. You want to use this kind of blade to edge your lawn in this case.

  • Scoop-Cut Edger Blades

This type of edger blade would be appropriate if you need something that can also dig through soil and edge fresh grass seed.

The most prominent feature of this kind of blade is that it comes with scoop-cut ends. It should help prevent the grass from touching your flowerbeds.

Frequently Asked Questions (FAQs)

After reading all these reviews and knowing about edging blades, you may still have a few unanswered questions. Summing up a few of the most commonly asked ones, we are here to answer them for your convenience.

1. What is a lawn edger blade?

Answer: A lawn edger blade is the kind of blade you attach to lawn care equipment to even out the edges of your lawn. These blades are typically used for the finishing touches after mowing your lawn.

2. How to tell if an edger blade requires replacement?

Answer: Edger blades usually don’t last for a very long time. On a good day, it would last for about a month or so. After using it about 5-6 times, we recommend getting it replaced.

You can also get it replaced less frequently, but we doubt that would add to the efficiency of your lawn’s edging.

3. Which blade type is best for light edging?

Answer: If you do not require heavy-duty edging of your lawn and just need to even out everything, a straight horizontal blade is a way to go. This type of blade is typically made for low-effort trimming and edging.

The kind of edging that does not require heavy-duty tools is where the flat blades shine. So for this purpose, get the flat horizontal blades.

4. Why do I need an edging blade?

Answer: In our opinion, a perfectly smooth lawn with evenly cut grass is what looks the best. If you want to up your lawn mowing game, you have to start edging. And for this reason, you need a high-quality edger and an edger blade.

Final Words

So that pretty much sums it up. What are your thoughts on the edger blades that we reviewed? If you ask for our opinion on which the best choice would be, we would have three recommendations.

As these are different types and serve slightly different purposes, we suggest going for the 3-Sided MTD Genuine Edger Blade by Arnold for a star-shaped option, the EB-007 Edger Blade by BLACK+DECKER for one with serrated blades, and the 4 Pack Edger Blade by Rotary for a flat blade option.

So if you are having a hard time choosing, we recommend you go for either of these three to make the decision for the best edger blades easier. We hope this article was able to provide valuable information about edger blades to you.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top